Diesel Engine Corrosion Inhibitor
DIESEL ENGINE CORROSION INHIBITOR is a multifunctional blend of nitrite based corrosion inhibitors for engine system. It prevents corrosion or rusting of metal by forming a passive coating of protective film on the metal surface. The product which we cater under Diesel Engine Corrosion Inhibitor are Coolant Corrosion Inhibitor, Nalcool 2000 and Nalco 2001 equivalents
DIESEL ENGINE CORROSION INHIBITOR contains a combination of ferrous and non-ferrous corrosion inhibitor, non-carbonate buffer, scale inhibitor, dispersant and leak detection dye. These formulations acknowledged for providing additional benefits such as saves power and heat transfer efficiency, extends system metal life, almost compatible with all coolant dye, inhibits scales formation and many others.
Coolant Corrosion Inhibitor
Samrat Industries Coolant Corrosion Inhibitor is a specially formulated (nitrite free) chemical additive for Mono Ethylene Glycol to protect system metals from corrosion. It is a multi-metal corrosion inhibitor and prevents corrosion in multi-ways.
Samrat Industries Coolant Corrosion Inhibitor modifies metal surface by absorption and making it less susceptible to corrosion. It buffers the organic acids formed as a result of glycol oxidation and prevents further formation of acids. Samrat Industries COOLANT CORROSION INHIBITOR protects the metal surface from corrosion without reducing the system\92s heat transfer efficiency.
Key Features and Benefits
- Extends system/engine metal life and coolant life
- Saves power and increases heat transfer efficiency
- Hard water tolerant and prevent scale deposition up to 200ppm calcium hardness
- Does not affect Freeze protection properties
- Does not form sludge deposit in the system
- Avoids leakage and minimizes radiator cleaning jobs
- Compatible with all sorts of coolant dye
- Non-volatile
Application and Dosage
Samrat Industries Coolant Corrosion Inhibitor is dosed at a given rate of the weight of Ethylene Glycol and water mixture.
Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.
Packing
Samrat Industries Coolant Corrosion Inhibitor is available in various pack sizes.
Keywords
Coolant Corrosion Inhibitor, Engine Coolant Corrosion Inhibitor, Coolant Inhibitor
Nalcool 2000
Samrat Industries Nalcool 2000 is a multifunctional blend of nitrite based corrosion inhibitors for engine system. It prevents corrosion or rusting of metal by forming a passive coating of protective film on the metal surface. Samrat Industries Nalcool 2000 contains a combination of ferrous and non-ferrous corrosion inhibitor, non-carbonate buffer, scale inhibitor, dispersant and leak detection dye.
Active Components: Nitrite, Nitrate, TT, Borate, Silicate and Polyacrylate for Aluminum, MS, Copper and Cu-alloys
Key Features and Benefits
- Multi-metal corrosion protection
- Scale prevention
- Saves power more than 30%
- Temperature resistance -29oC to 215oC
- Leakage and burst protection
- Extends system life
- Enhances system efficiency
Application and Dosage
System Preparation: To remove all dirt deposits, oil and rust particles, run the engine for 24-72 hours with 2ltrs Alstaclean RC50 for every 30ltrs of fresh water/coolant and then drain the dirty solution. Flush engine with fresh water and add fresh water/coolant with Samrat Industries Nalcool 2000 in the indicated ratio (1ltr for every 32ltrs of water/coolant).
Initial dose: Add Samrat Industries Nalcool 2000 - 1ltr for every 32ltrs of water/coolant to maintain a nitrite level of about 1200ppm.
To maintain a correct inhibitor level in the system, it is necessary to always top-up the system with Samrat Industries Nalcool 2000 during make-up requirement of plain water/coolant.
Regular dose (for small system less than 80ltrs): Add Samrat Industries Nalcool 2000 - 1ltr for every 32ltrs of water/coolant after every 20,000kms or 250hours or running.
Regular dose (for large system above 80ltrs): Add Samrat Industries Nalcool 2000 - 1ltr for every 80ltrs of water/coolant at every routine service.
Shelf life in use: Samrat Industries Nalcool 2000 should be drained and flushed once every year
Handling Measures and Precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.
Packing
Samrat Industries NALCOOL 2000 is available in HDPE containers of various sizes.
Keywords
NALCOOL 2000, Diesel Engine Corrosion Inhibitor, Nitrate Corrosion Inhibitor.