RO Antiscalant
RO Antiscalant merges variable products which we cater such as RO Antiscalant (High pH), Antiscalant Chemical, Membrane Antiscalant, RO Antiscalant Chemical. Using RO antiscalant helps to control inorganic scales of calcium, magnesium, barium, stronium, fluoride, iron and silica. RO antiscalant ensures above 80% reduction in scaling tendencies if used continuously. Samrat Industries's RO antiscalants are very effective antiscalant for waters with langelier saturation index upto +3, iron upto 1.4ppm in reject, silica upto 175ppm (or mg/l), high sdi. RO Membrane Antiscalant is compatible with coagulant mpt 150. Ro antiscalant keeps reverse osmosis system capacity close to design, and minimizes shutdowns and membrane cleaning cost. It aids to minimize the risk of scaling and eliminates disastrous effect on the use of hazardous acids, resulting in efficient plant operation with highest possible conversion rate. RO Antiscalant, offered by Samrat Industries Speciality Ltd, is effective in dwindling scale formation in presence of foulants like Sulfate salts of Calcium, Calcium Carbonate, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica. Antiscalant for Reverse Osmosis is invulnerable in handing and use with a very high recovery rate of membrane. It is effective at low Chemical dosage and hence economical.
RO Antiscalants are dosed directly to the RO feed water tank or feed water line (after pretreatment) at the recommended dosage of 1-3 mg/L and maximum dosage at 8mg/L, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. Maximum dilution should be 10% with RO or DI water for temperature less than 30 deg C. For higher temperature the dilution ratio can increase.
Key Features and Benefits
- Inhibit scale formation and effectively controls corrosion
- Protects the membrane efficiently
- Enhance the plant operation and equipments life span
- Economical
- Easy in usage and handling
RO Antiscalant (High pH)
Samrat Industries RO Antiscalant (HIGH PH) is a super-threshold RO membrane antiscalant and antifoulant which is able to stabilize a wide range of supersaturated salt solutions, thereby preventing the precipitation on the membrane surface.
It reduces the risk of scaling and eliminates the use of hazardous acids,resulting in efficient plant operation with highest possible conversion rate.
It is a very effective antiscalant for waters with LSI upto +2.6, Iron upto 1.2ppm in reject, Silica upto 166ppm (or mg/l), High SDI. It is also compatible with ALSTAFLOC series of coagulant and flocculants (polyelectrolytes). Samrat Industries RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica.
Key Features and Benefits
- Effective scale inhibition
- Alkalinity builder
- High recovery rate
- Low Chemical dosage
- Cost Effective
- Effective Iron fouling control by sequestration
- Reduced frequency of membrane cleaning
- Compatible with all types of membranes
- Completely organic and biodegradable
Application and Dosage
Samrat Industries RO Antiscalant (HIGH PH) is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1ppm and maximum dosage at 15ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content.
In case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium.
At about 10-15ppm dosage Samrat Industries RO Antiscalant (HIGH PH) is capable of fully inhibiting iron and calcium, and silica up to 166ppm. For higher silica content ALKRO HS40 should be used.
Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying Chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.
Packing
Samrat Industries RO Antiscalant (HIGH PH) is available in various pack sizes in HDPE containers.
Antiscalant Chemical
Samrat Industries Antiscalant Chemical is made specifically as a general purpose liquid antiscalant/antifoulant for membrane systems. Samrat Industries Antiscalant Chemical is characterized by its tight molecular structure, weight range and clear color which indicates the absence of impurities.
Samrat Industries Antiscalant Chemical controls fouling of scales of carbonate and sulfate salts of calcium,magnesium,barium and stronium; also iron and colloidal deposits.It is a very effective antiscalant for waters with high LSI and SDI. Slightly effective in high silica water. Samrat Industries Antiscalant Chemical keeps membrane permeate flow close to design, and minimizes downtime and membrane cleaning cost.
Key Features and Benefits
- Effective scale control
- High recovery rate
- Clear liquid
- Cost Effective
- Effective Iron fouling control by sequestration
- Reduced frequency of membrane cleaning
- Compatible with all types of membranes
- Completely organic and biodegradable
Application and Dosage
Samrat Industries Antiscalant Chemical is dosed directly to the RO feed water tank or feed water line before or after the system cartridge filter. If iron is present in water than antiscalant should be dosed post to prevent excess usage for iron chelation. The minimum recommended dosage of 2ppm and maximum dosage at 20ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content.
High alkalinity and hardness can be controlled by dosing 4-5ppm of product. But in case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium.
For higher silica content ALKRO HS40 should be used. Note: Dose point should be sufficiently down stream of the SBS injection point to
Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying Chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.
Packing
Samrat Industries Antiscalant Chemical is packed in HDPE jars and is available in variable pack sizes.
Membrane Antiscalant
Samrat Industries Membrane Antiscalant is a super-threshold RO membrane antiscalant and antifoulant which is able to stabilize a wide range of supersaturated salt solutions, thereby prevents the precipitation on the membrane surface.
It minimizes the risk of scaling and eliminates the use of hazardous acids, resulting in efficient plant operation with highest possible conversion rate.
Samrat Industries Membrane Antiscalant is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Stronium and Magnesium, Calcium Fluoride, Iron and Silica.
Key Features and Benefits
- Safe to handle and use
- Very high recovery rate of membrane
- Low Chemical dosage and hence results cost effective
- Effective over a wide variety of foulants
- Does not cause any calcium or iron based phosphate deposition as in case of SHMP
- Establishes significantly longer intervals between cleaning
- Compatible with all kinds of memranes
Application and Dosage
Samrat Industries Membrane Antiscalant is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1mg/l and maximum dosage at 15mg/l, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content.
High alkalinity and hardness can be controlled by dosing 4-5mg/l of product. But in case of high iron content of about 1.2mg/l, the dosing has to be increased by 6-8mg/l for stabilizing Calcium.
At about 10-15mg/l dosage Samrat Industries Membrane Antiscalant is capable of fully inhibiting iron and calcium, and silica upto 217mg/l at pH 7.5. For higher silica content ALKRO HS40 should be used.
It is a highly effective antiscalant for waters with LSI upto +2.6, Iron upto 1.2mg/l in reject, Silica SCR 1.32, High SDI.
Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying Chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.
Packing
Samrat Industries Membrane Antiscalant is available in 25/50kgs HDPE jars, 260kgs HDPE barrels and 1300kgs IBC.
RO Antiscalant Chemical
Samrat Industries RO Antiscalant Chemical is a liquid antiscalant for RO membrane system. Using Samrat Industries RO Antiscalant Chemical controls inorganic scales of calcium, magnesium, barium, stronium, fluoride, iron and silica. Samrat Industries RO Antiscalant Chemical ensures above 80% reduction in scaling tendencies if used continuously.
It is a very effective antiscalant for waters with LSI upto +2.7, Iron upto 1.4ppm in reject, Silica upto 175ppm (or mg/l), High SDI. It is compatible with ALSTAFLOC series of coagulant and flocculants (polyelectrolytes).
Samrat Industries RO Antiscalant Chemical keeps RO capacity close to design, and minimizes shutdowns and membrane cleaning cost.
Key Features and Benefits
- Effective scale inhibition
- High recovery rate
- Low Chemical dosage
- Cost Effective
- Effective Iron fouling control by sequestration
- Reduced frequency of membrane cleaning
- Compatible with all types of membranes
- Completely organic and biodegradable
Application and Dosage
Samrat Industries RO Antiscalant Chemical is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1ppm and maximum dosage at 15ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content.
High alkalinity and hardness can be controlled by dosing 4-5ppm of product. But in case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium.
At about 10-15ppm dosage Samrat Industries RO Antiscalant Chemical is capable of fully inhibiting iron and calcium, and silica upto 175ppm. For higher silica content ALKRO HS40 should be used.
Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying Chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.
Packing
This product is available in HDPE drums and jars of various packing sizes. Please refer to your CSL representative to confirm you exact packing size.