Boiler Descalant
Boiler Descalant is a powerful concentrated acid based descaling detergent that is used massively for boilers. It is capable of removing lime scales in boiler tubes consequently increasing thermal efficiency leading to better energy utilization. It is an acidic, corrosion inhibitor and aqua in nature. It is an excellent solution for removing grease, oil and other unwanted thick liquids.
It should be handled with care and safety equipment should be used while applying, moreover it should be stored in original containers in cool and dry place, distant from heat flame and direct sunlight. It also removes heavy deposits of water scale and iron oxides very effectively too. The products which we cater under this category are Liquid Boiler Descalant, Boiler Descaling Powder, Resin Descalant, Boiler Boil-Out Chemical, Sulfamic Descalant, Online Boiler Descalant and Geyser Scale Remover.
Liquid Boiler Descalant
Samrat Industries’s Liquid Boiler Descalant is a
multi-functional heavy duty chemical compound for removal of scale, rust and
greasy deposits in boiler systems. It removes heavy deposits of water scale
and iron oxides very effectively. It is perfectly suitable for removing lime
and rust deposits and oily contaminants.
Samrat Industries’s Liquid Boiler Descalant comes with an inbuilt corrosion
inhibitor package to protect cleaned surfaces from acidic attack. It is
compatible with most common metals such as ms, ss, copper, copper alloys
such as cu-ni except zinc and galvanized surface.
Key Features and Benefits
- Excellent cleaning efficacy
- Wetting agent for scale penetration
- Excellent removal of oil and grease
- Inhibitor package to prevent corrosion
- Excellent derusting
- Economical
Application and Dosage
Prepare a solution of 10% W/W Samrat Industries liquid boiler descalant in preheated water (preferably) at 70-80oc. The descalant solution should be prepared 10-20% in excess of the system hold up volume. Re-Circulate the solution using an acid compatible pump (with polypropylene impeller) for maximum of 6hours. After descaling is completed, flush out the solution and rinse once with plain water. Passivate the system with 2% W/W passirinse® solution in water and recirculate for an hour at ambient temperature. Passivation is done to avoid flash rusting after descaling. Flush out the solution and return system to normal service.
Note: If a boiler is to be kept idle for some time, it is recommended to fill it with 1% solution of passirinse, for system preservation against rusting.
Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.
Packing
Samrat Industries’s Liquid Boiler Descalant is available in 50kgs jars.
Boiler Descaling Powder
Samrat Industries’s Boiler Descaling Powder is a
sulphamic acid based descalant combined with corrosion inhibitor and wetting
agent, to provide corrosion protection to metal during descaling and giving
optimum cleaning of water side of heat exchangers and boilers.
Samrat Industries’s Boiler Descaling Powder also aids in removal of loose
corrosion products, organic foulants, and dirt, clay and silt deposits.
Samrat Industries’s Boiler Descaling Powder is used for descaling of high and
low pressure boilers, heat exchangers etc., And is safe for aluminum,
stainless steel, carbon steel, mild steel, cast iron, brass, admiralty
metal, titanium, copper and copper alloys, pvc plastic, rubber or leather
when used as directed.
Key Features and Benefits
- Effective removal of hard scale deposits from heat exchanger
- Corrosion inhibited and safe for system metal and components
- Excellent wetting characteristics to aid in removal of organic and greasy foulants
- Biodegradable product
- Easy to handle
Application and Dosage
Samrat Industries’s Boiler Descaling Powder is non-inflamable and biodegradable chemical compound and does not give off obnoxious fumes. The method of using Samrat Industries boiler descaling powder is very simple and basic.
Prepare a solution of 5-10% W/W Samrat Industries boiler descaling powder in preheated water (preferably) at 70-80oc. The descalant solution should be prepared 10-20% in excess of the system hold up volume. Re-Circulate the solution using an acid compatible pump. After descaling is completed, flush out the solution and rinse once with plain water. Passivate the system with 2% W/W passirinse® solution in water and recirculate for an hour. Passivation is done to avoid flash rusting after descaling. Flush out the solution and return system to normal service.
Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer msds for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and msds for more details and shelf life.
Packing
Samrat Industries’s Boiler Descaling Powder is available in 25kgs packs.
Resin Descalant
Samrat Industries’s Resin Descalant is an on-line
cation resin cleaning compound for the prevention of organic fouling and
heavy metal fouling. It is a blend of several surfactants and iron
solubulising agents.
Key Features and Benefits
Excellent Prevents resin fouling: Samrat Industries’s Resin
Descalant reduces progressive fouling of cation resin due to oil and
suspended solids. It keeps resin bead surface clean and extends resin life.
Regular use of Samrat Industries’s Resin Descalant reduces regeneration
frequency.
Consistent quality output: Regular use of Samrat Industries’s
Resin Descalant reduces
Regeneration frequency and service cycle and ensures a consistent quality
output.
Application and Dosage
On-line Cleaning: Samrat Industries’s Resin Descalant can be
added to the rinse cycle of every regeneration. On-line cleaning is carried
out during the rinse cycle. The recommended dosage is 1 kg, for every 1000
litres of resin off -
Line Cleaning Procedure
i) Drain water up to the resin level after regeneration
and rinse cycle.
ii) Add Samrat Industries’s Resin Descalant at a rate of 15
kgs, for every 1000 litres of resin in the column.
iii) Agitate using compressed air in order to mix it with
the resin.
iv) Rinse until water is clear. If fouling is still
suspected, repeat the above process.
v) After 30 minutes final rinse, regenerate with 100%
excess salt before taking into the service line.
Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor
respirator, gloves and boots should be worn while handling and applying
chemicals. Splashes on skin should be washed off with water immediately. In
case of splashing into the eyes, flush it with fresh water and obtain
medical attention. Should not be injected. Please refer MSDS for more
details.
Storage
This product should be stored in original containers in cool and dry place,
away from sources of heat, flame and direct sunlight. Please refer Technical
Data Sheet, Label and MSDS for more details and shelf life.
Packing
Samrat Industries’s Resin Descalant is available in 35 kgs packs.
Boiler Boil-Out Chemical
Samrat Industries’s Boiler Boil-Out Chemical is a
unique descaling compound based on strong alkali, wetting agent and silica
scale penetrant for removing of silica deposits and organic foulants from
the water side of boiler, heat exchangers etc.
Key Features and Benefits
- Effectively removes silicious deposit and organic, oil and grease deposits
- Softens the resin and carbonised matter in sugar boiler evaporator pans
- Aids in loosening of mineral scale deposits for acidic cleaning
Application and Dosage
Samrat Industries’s Boiler Boil-Out Chemical is an offline descalant and should be used at 5-10% W/W solution in preheated water (preferably) at 70-80oc. The descalant solution may be boiled in the boiler until scale is removed.
Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.
Packing
Samrat Industries’s Boiler Boil-Out Chemical is available in 40kgs jars.
Sulfamic Descalant
Samrat Industries’s Sulfamic Descalant is an
efficient descaling agent and is used for cleaning of a variety of
industrial equipments and domestic appliances. Samrat Industries’s Sulfamic
Descalant can be used for removing water and process scales from industrial
equipments. Broadly these find use in the chemical and fertilizer industry,
rice mills, dairy and food equipments, brewery equipment, marine equipment,
sugar industry etc.
Samrat Industries’s Sulfamic Descalant is non-inflammable and, unlike
hydrochloric acid, does not give off obnoxious fumes. The safety of Samrat Industries
sulfamic descalant has been further increased by the addition of corrosion
inhibitors and other chemicals to make Samrat Industries sulfamic descalant a
versatile descaling agent which is safer still in terms of equipment
corrosion and safety of personnel.
The field of descaling is wide and the exact application of Samrat Industries
sulfamic descalant can only be determined after considering the nature and
extent of scaling, and the type of equipment that is to be descaled.
Application and Dosage
Samrat Industries’s Sulfamic Descalant is used in various applications and at
different concentration ratio depending upon the amount and type of deposit
and system parameters. Normally for a system with hard scale deposits a
5-15% V/V solution is recommended. Preferably this solution should be made
with pre-heated water at 70-80oc. The total volume of solution should be
about 1.2 times of water holding capacity of equipment to be descaled.
Recirculate the solution for about 8 hours using a acid compatible pump.
After descaling it is necessary to passivate system with 2% solution of
alstascale ps20 into the last rinse and return to normal service.
Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor
respirator, gloves and boots should be worn while handling and applying
chemicals. Splashes on skin should be washed off with water immediately. In
case of splashing into the eyes, flush it with fresh water and obtain
medical attention. Should not be injected. Please refer msds for more
details.
Storage
This product should be stored in original containers in cool and dry place,
away from sources of heat, flame and direct sunlight. Please refer technical
data sheet, label and msds for more details and shelf life.
Packing
Samrat Industries’s Sulfamic Descalant is available in 50kgs bags.
Online Boiler Descalant
Samrat Industries’s Online Boiler Descalant is a
sludge conditioner based on synthetic polymer for liquefying in boilers. It
helps to keep precipitated salts in suspension and prevents deposition and
sludge formation.
Key Features and Benefits
- Prevents Scale Formation: Samrat Industries’s Online Boiler Descalant contains a powerful polymeric dispersant which prevents scale formation. It fluidizes the scale forming material and reduces accumulation on internal surfaces.
- Removes Sludge Easily: The synthetic polymer in Samrat Industries online boiler descalant makes the sludge non-adherent and fluid. Precipitated calcium salts, iron and silica are conditioned and kept free flowing, thus free flowing sludge can be easily removed during routine blow down.
- Cleans Boiler: Non-Adherent and free flowing sludge does not form deposits on the internal surface. Blow down valves, pipes and water tubes are kept clean, reducing maintenance costs and the number of shutdowns for cleaning.
- Reduces Energy Costs: Samrat Industries’s Online Boiler Descalant keeps all heat exchange surfaces clean, improving heat transfer efficiency. This results in the complete utilization of fuel resulting in reduced fuel costs.
Application and Dosage
Samrat Industries’s Online Boiler Descalant dosage depends on the quality of the boiler feed water, usually 10-40ppm of sludge conditioner is used. However, Samrat Industries online boiler descalant should be added in the feed water tank and is preferable to dose it continuously.
For further assistance on dosage concentration, method and safety measures please refer your csl representative.
Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.
Packing
Samrat Industries’s Online Boiler Descalant is available in 35 kgs packs.
Geyser Scale Remover
Samrat Industries’s Geyser Scale Remover is a special
compound for removal of scale and rust in geyser systems or water heaters.
It removes heavy deposits of water scale and iron oxides very effectively.
It is perfectly suitable for removing lime and rust deposits and oily
contaminants.
Samrat Industries’s Geyser Scale Remover comes with an inbuilt rust inhibitor
package to protect cleaned surfaces from acidic attack. It can be used on
most common metals such as ms, ss, copper, cast iron, copper alloys such as
cu-ni except zinc and galvanized surface.
Key Features and Benefits
- Excellent cleaning efficacy
- Wetting agent for scale penetration
- Excellent removal of oil and grease
- Inhibitor package to prevent corrosion
- Excellent derusting
- Economical
Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.
Packing
Samrat Industries’s Geyser Scale Remover is available in the following pack sizes of 24kgs box (4x6kgs jars), 35kgs HDPE jars.